TANKII Apm 0cr21al6nb / 0cr27al7mo2 Resistance Heating Wire

0cr21al6nb/0cr27al7mo2/TANKII Apm Resistance Heating Wire for Kilns Element

Description

TANKII APM is an advanced powder metallurgical, dispersion strengthened, ferrite FeCrAl alloy which is used at tube temperatures up to 1250°C (2280°F). TANKII APM tubes have good form stability at high temperature. TANKII APM forms an excellent, non-scaling surface oxide, which gives good protection in most furnace environments, i.e. Oxidising, sulphurous and carbonaceous gas, as well as against deposits of carbon, ash, etc. The combination of excellent oxidation properties and formstability makes the alloy unique.

Chemical Content, %

Application:

Typical applications for TANKII APM are radiant tubes in electrically or gas fired furnaces such as continuous galvanizing furnaces, seal quench furnaces, holding furnaces and dosing furnaces in the aluminium, zinc, lead industries, thermocouple protection tubes, furnace muffles for sintering applications.

Using special material (no nickel content) with a proprietary manufacturing process, TANKII APM material is very resistant to oxidation and gives superior hot strength. When heated above a certain temperature, very strong and uniform alumina layer will be formed at outer to protect the material from further oxidation.

As a result, when APM is used to manufacture Radiant Tube Heater and the Radiant Tube, it could give very long life with any bending or oxidation happening at the surface of the heater and the tube. TANKII tubular and APM tube, when used together, will give a minimum 3 times longer life than regular radiant tube heater set. Tubular heating elements are available in standard dimensions from 68 to 170 mm (2.6 to 6.6 inch) diameter and can be supplied in almost any length. Tubular elements can be used inside all types of radiant tubes or as stand-alone elements.