Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd First Quality, Sincere Service
Add to Cart
Alloy 625/ERNiCrMo-3 Nickel Welding Wire / Inconel 625 Nichrome Wire For Welding With Wear-Resistant Coating
Application:
Inconel 625 wire
Oxidation and heat resistant coatings
Corrosion resistance
Digesters
Chemical composition:
| Alloy | % | Ni | Cr | Mo | Nb+N | Fe | Al | Ti | C | Mn | Si | Cu | P | S |
| 625 | Min | balance | 20 | 8 | 3.15 | |||||||||
| Max | 23 | 10 | 4.15 | 5 | 0.4 | 0.4 | 0.1 | 0.5 | 0.5 | 0.5 | 0.015 | 0.015 |
| Density | 8.4 g/cm³ |
| Melting point | 1290-1350°C |
Introduction:
Inconel 625 wire is a high purity nickel chrome wire specifically designed for arc spraying. It produces dense, well-bonded coating with resistance to corrosion, and stress cracking in caustic mediums.
Surface Preparation:
Inconel 625 wire
Surface should be clean, white metal, with no oxides(rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
