Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd First Quality, Sincere Service
Add to Cart
Selfbonding enameled wire CuNi6 0.08mm for Winding Transformer
Application of CuNi6
CuNi6 , low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
roduct type:1EI/AIW/200 Thermal Rating:C
Applicable standard: IEC 60317-13;MW35-C, MW73-C, GB/T 6109.2, JIS C3215, UL-Certified
Size available(mm): 0.08mm-4.00 mm
Description:
EAIW is double-layer insulation, and its bottom layer is Polyesterimide or Modify Polyester covered by Polyamideimide. This combination improves insulation characteristics to obtain the best characteristics, such as strong physical characteristics and excellent insulation with excellent chemical resistance, refrigerant resistance.
Characteristic:
High heat resistance, high mechanical properties
(1) It has better heat resistance, moisture resistance and chemical resistance than PEW + NY.
(2) EAIW provides excellent thermal shock resistance, adhesion, softening resistance and wear resistance.
(3)Capable of working under extreme situations where strong resistibility against very high and low temperature, powerful cryogen, hard radiation and forceful heat shock are needed.
Typical Applications:
Applied in C Class motors, transformers, electric refrigerator powered by refrigerant R22/R410c/R600a/134a and windings in air-conditionar compressor. Motors, Dry transformers, Heavy duty hand tool motors, Encapsulated coils.
| Copper-nickel alloy wire, | Constantan Wire,CuNi1~CuNi44,pure copper | |
| Ni-Cr Alloy wire | NiCr35/20,NiCr70/30,NiCr60/15,NiCr80/20,NiCr90/10,NiCr AA,Karma. | |
| Fe-Cr-Al Alloy wire | Cr13Al4,Cr21Al4,Cr21Al6,Cr23Al5,Cr25Al5, Cr21Al6Nb,Cr27Al7Mo2, | |
| Cu-Ni-Mn Alloy wire | CuMn12Ni2,CuMn12Ni4,Manganin, | |
| Any copper alloy and nickel alloy is available | ||
| Red,Green,Yellow,Black,Blue,Nature etc. |
| Insulation-enamelled Name | Thermal LevelºC (working time 2000h) | Code Name | GB Code | ANSI. TYPE |
| Polyurethane enamelled wire | 130 | UEW | QA | MW75C |
| Polyester enamelled wire | 155 | PEW | QZ | MW5C |
| Polyester-imide enamelled wire | 180 | EIW | QZY | MW30C |
| Polyester-imide and polyamide-imide double coated enameled wire | 200 | EIWH (DFWF) | QZY/XY | MW35C |
| Polyamide-imide enamelled wire | 220 | AIW | QXY | MW81C |
| roduct Name | Copper Nickel Alloy CuNi Wire |
| Product Description | Copper Nickel Alloy is mainly made of copper and nickel. The copper and nickel can be melted together no matter what percentage. Normally the resistivity of CuNi alloy will be higher if the Nickel content is larger than Copper content. From CuNi6 to CuNi44, the resistivity is from 0.1μΩm to 0.49μΩm. That will help the resistor manufacture choosing the most suitable alloy wire. |
| Product Features | By the way, the Copper Nickel wire is easy to be welded and easy to be fabricated, so it can be made into many forms and widely used in all areas. |
