Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd First Quality, Sincere Service
Add to Cart
0.5mm Type S /B/R Bright Thermocouple Bare Wire Used For Steel Industry
Introduction:
The Accuracy of a thermocouple is measured by the difference between what a thermocouple is reading and the actual temperature of the chamber. This is measured when the kiln is at a steady state (not ramping up or down).
Tankii Type S thermocouple is considered to be the most accurate thermocouple and is therefore used as the standard to measure against. The material used to construct a Type S thermocouple will not degrade in most atmospheres and therefore the thermocouple will not drift with age.
Tankii Type S – Special Order Upgrade
0.5mm Type S /B/R Bright Thermocouple Bare Wire Used For Steel Industry
Characteristics:
Tankii thermocouple wires have excellent performance and are extensively used in the temperature measurement and control in different fields, such as metallurgy, chemical industry, petroleum industry, machinery-electric industry, energy industry, agriculture and military industry.
Tankii products conform to the standards of IEC584 -1and IEC-2.
0.5mm Type S /B/R Bright Thermocouple Bare Wire Used For Steel Industry
| Thermocouple type and index | Measurement Range ℃ | |
| Type | Index | |
| | B | 600~1700 |
| | R | 0~1600 |
| | S | 0~1600 |
| | K | -200~1300 |
| | E | -200~900 |
| | J | -40~750 |
| | T | -200~350 |
| | N | -200~1300 |
The allowable grade and Tolerance are obtained at 0℃
| Thermocouple | Grade | Temperature range | Allowable Tolerance /℃ |
| Type B | Ⅱ | 600~1700 | ±0.25% t |
| Ⅲ | 600~800 | ±4 | |
| 800~1700 | ±0.5%t | ||
| Type R(S) | Ⅰ | 0~1100 | ±1 |
| 1100~1600 | ±[1+(t－1100) ×0.3％] | ||
| Ⅱ | 0~600 | ±1.5 | |
| 600~1600 | ±0.25% t | ||
| Type K and Type N | Ⅰ | -40~1100 | ±1.5℃ or ±0.4%t |
| Ⅱ | -40~1300 | ±2.5℃ or ±0.75%t | |
| Ⅲ | -200~40 | ±2.5℃ or ±1.5%t | |
| Type E | Ⅰ | -40~1100 | ±1.5℃ or ±0.4%t |
| Ⅱ | -40~1300 | ±2.5℃ or ±0.75%t | |
| Ⅲ | -200~40 | ±2.5℃ or ±1.5%t | |
| Type J | Ⅰ | -40~750 | ±1.5℃ or ±0.4%t |
| Ⅱ | -40~750 | ±2.5℃ or ±0.75%t | |
| Type T | Ⅰ | -40~350 | ±0.5℃ or ±0.4%t |
| Ⅱ | -40~350 | ±1.0℃ or ±0.75%t | |
| Ⅲ | -200~40 | ±1.0℃ or ±1.5%t |
Shanghai tankii, specializing in producing thermocouple wire, thermocouple cable, thermocouple MI cable.
A typical thermocouple construction consists of a pair of dissimilar metals that are electrically joined together at the sensing point and connected to a voltage measuring instrument at the other end. When one junction is hotter than the other, a thermal “electromotive” force (in millivolts) is produced that is roughly proportional to the difference in temperature between the hot and cold junctions.
0.5mm Type S /B/R Bright Thermocouple Bare Wire Used For Steel Industry
