Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd First Quality, Sincere Service
Add to Cart
Inconel 625 nickel alloy wire thermal spray wire arc flame spray wire surface production
Chemical composition:
| Alloy | % | Ni | Cr | Mo | Nb+N | Fe | Al | Ti | C | Mn | Si | Cu | P | S |
| 625 | Min | balance | 20 | 8 | 3.15 | |||||||||
| Max | 23 | 10 | 4.15 | 5 | 0.4 | 0.4 | 0.1 | 0.5 | 0.5 | 0.5 | 0.015 | 0.015 |
Introduction:
Inconel 625 wire is a high purity nickel chrome wire specifically designed for arc spraying. It produces dense, well-bonded coating with resistance to corrosion, and stress cracking in caustic mediums.
Surface Preparation:
Inconel 625 wire
Surface should be clean, white metal, with no oxides(rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
Application:
Inconel 625 wire
Oxidation and heat resistant coatings
Corrosion resistance
Digesters
| Density | 8.4 g/cm³ |
| Melting point | 1290-1350°C |