NiAl 95/5 Aolly 1.6mm 2.0mm Thermal Spray Wire Produces Dense , Well Bonding Coatings

NiAl95/5

NiAl 95/5 Aolly 1.6mm 2.0mm Thermal Spray Wire Produces Dense , Well Bonding Coatings

Application:Characteristics:

NiAl 95/5: Thermal Spray Wire (Sp 95/5, SD 95/5, Ni95Al5)

NiAl 95/5 is an austenitic nickel-aluminium alloy (NiAl alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding coatings.
Typical applications for NiAl95/5 are bond coats, as protective coatings against high-temperature oxidation, protective coatings against scaling of conventional iron base alloys and as build-up coatings for dimensional restoration.

Chemical Composition: Ni ~ 95, Al ~ 5

Application or Properties: Spray wire with excellent bonding strength. Sprayed layers of this material are-resistant to variation in high temperatures and are used as a buffer layer for all other spraying alloys. Hardness, coating macro: Approximately HRc 22. Maximum working temperature: Approximately 800° C. Layer thickness: Approximately 0.1-0.15 mm.

Types ingredient

Diameter: 1.2mm, 1.6mm, 2.0mm, 3.0mm

Technical Index

1 Coating Hardness: 23~25 HRC

2 Bond Strength: 60Mpa above

3 Working Temperature: 1250 °C below

Packaging & Shipping

Packaging: Products are generally supplied in standard cardboard boxes, pallets, wooden boxes. Special packaging requirements can also be accommodated. (also depend on the customers' requirements)
For the Thermal spray wires, we pack the wires on spools. Then put spools into cartons, Then put the cartons onto pallet.
Shipping: We cooperation with many logistics company, We can provide express, sea transportation, air transportation, and rail way transportation based on customers' requirement.